Go to Post As long as the competition gets the attention of someone and drags them in, it doesn't matter how they get there. - Andy Grady [more]
Home
Go Back   Chief Delphi > FIRST > Robot Showcase
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Spotlight this post!  
Unread 20-01-2011, 00:17
Aren Siekmeier's Avatar
Aren Siekmeier Aren Siekmeier is online now
on walkabout
FRC #2175 (The Fighting Calculators)
Team Role: Mentor
 
Join Date: Apr 2008
Rookie Year: 2008
Location: 대한민국
Posts: 735
Aren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond reputeAren Siekmeier has a reputation beyond repute
Re: Team 2175 Logo Motion Robot Design

Quote:
Does the CAD have 6 Jaguars on it?
Right now it only includes the jags for the drivetrain. There will be at least one more for the lift mechanism, and possibly more depending on minibot deployment, gripper design, etc.

Quote:
1.) How do you plan on picking up the tubes from the floor easily with the telescoping lift centered in the bot?
2.) The placement of your batter seems a little difficult to reach from the views that you have provided. Have you guys planned on an easy way to change out your batteries?
1. The gripper will have two positions powered by a cylinder. Vertical for starting the match within the frame perimeter and for scoring. And horizontal for picking tubes up off the ground. In the latter orientation, it will have to reach forward and over the bumpers to the ground.
2. The battery can just be lifted a few inches, tipped, and dropped out the bottom. That's the idea anyway, we haven't checked that the clearance will actually allow that. If not, there will probably just be thumb screws or something on the brackets holding in. Either way, it will be accessed from the bottom.

Quote:
What gear reduction are you thinking for the FP?
A 20lb arm climbing 10 ft in 1s is about 270W, appropriate for an FP it seems. With a 1" radius pulleys, we're looking about 8.5:1 off the FP. We're also considering two RS 775s, but we're unsure of the transmission options for that.

And actually, with four equally powered wheels, the robot goes slower diagonally, just with more torque (the wheel speeds don't add up, but the torques do). However, we can go twice as fast in one direction by doubling the CIMs there. Since we don't care as much about strafing, we demote them to RS 775s.

Yes, the belt is fixed to the final (gripper) stage. Powering the belt pulls this up and down at the same time as the first stage (or perhaps in sequence...). We realized that a closed belt would simplify things a lot, but at first were failing to see how to make it work. But conveniently the length lost between the stages will always equal the height change of the final stage, so the belt stays the same length (assuming its vertical). We actually verified this in Solidworks down to a thousandth of an inch. Pretty sweet. Of course, who knows if the real mechanism will work that well. The double clamp on the gripper stage also allows us to quickly tension the belt as needed while keeping it all working smoothly.

@Dr Theta: We might also be attending Lake Superior, depending on funding, so perhaps we'll see each others' handiwork there?
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:08.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi