holonomic drive/ mecanum wheels

[Nailo2532]

I think I was mis understood, I am looking for the vi example. Not the programming block.

[j.cole]

I do not see one but it isn't much different from an arcade or tank drive (with using the VI given) aside from that instead of 2 axes you need 3 axes (from the joystick). Your X value goes to the x your Y value goes to your y and your 3rd axis goes to the rotation. After that you just need to test to see that everything is going the right direction by firing up the robot and running it.

[Nailo2532]

I don't see an x and y spot on the holonomic drive, it has magnitude, direction, and rotation. should it be like this?

[Ether]

Originally Posted by Nailo2532

I don't see an x and y spot on the holonomic drive, it has magnitude, direction, and rotation. should it be like this?

You're looking at the polar version. Switch to the Cartesian version.

[Nailo2532]

Originally Posted by Ether

You're looking at the polar version. Switch to the Cartesian version.

I hooked it up to servos and it worked thanks