|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||||
|
|||||
|
Re: Bumper rules
The Bumper Zone is defined in Section 1.6 (along with all the other definitions). Bumpers must be in the Bumper Zone.
Your configuration should pass inspection if your supports are < 8" (20 cm) apart or < 1/4" (0.635 cm) deep per <R07-K>. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|