CRIO Wireless network issues

[SuperBK]

We are still working on getting ours to talk, but here's what I understand so far. Anyone please correct me if I'm wrong.

The small black gaming adapter on the robot from last year goes away.
The Linksys router on the drivers's station, that was connected to the Classmate goes away.

The D-link access point / bridge (DAP-1522) is used in the robot, the classmate connects wirelessly to it. The switch should be in "Bridge" mode for competition, and "AP (access point) for programming. Follow the instructions in the control system docs for setting it up.

The development laptop needs to have its wireless address set to an address like 10.x.y.50, or turn on DHCP in the d-link to start handing out addresses starting at 10.x.y.10. So it stays above the addresses use for the CRIO, d-link, and classmate.

We are working on getting Windriver workbench to see the CRIO. It still won't see it, even tethered. The laptop can ping it. Anyone have any helpful ideas on that?

Brian

[jhersh]

Originally Posted by SuperBK

We are working on getting Windriver workbench to see the CRIO. It still won't see it, even tethered. The laptop can ping it. Anyone have any helpful ideas on that?

Make sure you have imaged the cRIO and selected C++ as the language. Otherwise the debugging service on the cRIO will not be started and Workbench will not have anything to connect to.

-Joe

[Blackphantom91]

The default subnet is 255.0.0.0 also for the non clasmate i belive the last octet should be .6 so it should be 10.xx.xx.6 with a subnet of 255.0.0.0 as far as connectivity goes if you are tethering the connection (running cable from the robot alot of teams leave the wireless on on the classmate and dont change the ips for it (just what i have noticed, i have done it myself.)

Addressing scheme for clasmate
Ip: 10.xx.xx.5
subnet mask: 255.0.0.0
default gate: CRio


if you have anymore questions please PM and ill see what I can do

[kubibaba123]

Originally Posted by Blackphantom91

The default subnet is 255.0.0.0 also for the non clasmate i belive the last octet should be .6 so it should be 10.xx.xx.6 with a subnet of 255.0.0.0 as far as connectivity goes if you are tethering the connection (running cable from the robot alot of teams leave the wireless on on the classmate and dont change the ips for it (just what i have noticed, i have done it myself.)

Addressing scheme for clasmate
Ip: 10.xx.xx.5
subnet mask: 255.0.0.0
default gate: CRio


if you have anymore questions please PM and ill see what I can do

If we are doin wireless connection on a non classmate laptop should the adressing scheme :
Ip: 10.xx.xx.6
subnet mask: 255.0.0.0
default gate: 10.xx.xx.2 (cRIO)

thanks in advance...