Spring Plungers

[Strykeforce2767]

could we use this on our minibot?
we were thinking it fell under Mechanical Hardware.

Spring Plungers
6 products match your selections
Type Ball-Nose
Spring Plunger Type Spring Plunger
Drive Slotted
Body Material Steel
Body Finish Plain
Nose/Ball Material Nylon
Nose/Ball Finish Plain
System of Measurement Inch
Inch Thread Size 10-32
Body Length (B) .513"
Nose/Ball Projection (C) .025"
Nose/Ball Diameter (D) .094"
Maximum Temperature 180° F

[konk25]

Originally Posted by Strykeforce2767

could we use this on our minibot?
we were thinking it fell under Mechanical Hardware.

Spring Plungers
6 products match your selections
Type Ball-Nose
Spring Plunger Type Spring Plunger
Drive Slotted
Body Material Steel
Body Finish Plain
Nose/Ball Material Nylon
Nose/Ball Finish Plain
System of Measurement Inch
Inch Thread Size 10-32
Body Length (B) .513"
Nose/Ball Projection (C) .025"
Nose/Ball Diameter (D) .094"
Maximum Temperature 180° F

springs are not allowed, you can refer to the robot manual to see what parts you can use on your minobot.
http://usfirst.org/uploadedFiles/Rob...Robot_RevD.pdf

[Vikesrock]

The word "hardware" in <R92> has been replaced with the word fastener. So no, those would not be legal for use on the Minibot.

[Strykeforce2767]

Thanks, we haven't been checking for revisions... I guess we'll do that more often now.

[Vikesrock]

Originally Posted by Strykeforce2767

Thanks, we haven't been checking for revisions... I guess we'll do that more often now.

Yes, it is very important to keep track of updates to the manual. They are issued on Tuesday's and Friday's and can be found here:

http://www.usfirst.org/roboticsprogr...nt.aspx?id=450