Code built, robot somewhat connect.. but not running.. HELP!

[Team#2057-Vegas]

Originally Posted by Greg McKaskle

You don't mention much about the driver station. Is your robot enabled? There may be DS issues that need to be resolved before you can enable. The other issue could be errors in Begin or in Teleop that are cause your motor updates to return an error.

Greg McKaskle

I did remember when i got home i forgot to close my operations and put the safety vi's in the begin.. so i'll try that monday.. but what was happening was by wire it was enabled but the code wouldnt run.. a push of a button or joystick did nothing. we tried running a example code too and it didnt change anything.. so im hoping it wasnt any coding error.. ill write down the errors i get monday if my fix to the code doesnt change things

[U5ER NAM3]

i need help on finding the set speed control in the while loop thing i can not find it at all

[MattCarey3625]

Originally Posted by U5ER NAM3

i need help on finding the set speed control in the while loop thing i can not find it at all

What do you mean by Set Speed? Do you mean Set Output for motor control? Why do you need the While loop constant? I believe I can help, I promise that I can do more than ask questions

[WizenedEE]

Look under the diagnostics tab, and if it doesn't show anything there, it's probably wiring. If there's something there, by all means post it!