pic: burnt up TETRIX motor

[PhilBot]

Originally Posted by Al Skierkiewicz

A 5 or 6 amp fuse in line with each motor might be a good protection. If installed properly with insulation, etc., I do not see any rule that would prevent it. The stall current on the motor is listed at 7 amps I believe.

Pitsco sells just such a modified motor power wire:

It's hugely expensive for what it is, but it's clearly 100% legal (since it's a standard TETRIX part) and it's ready to go for those not wanting to do soldering.

http://parts.ftcrobots.com/store/det...&c=1&t=0&l= 0