|
|
|
 Chiefdelphi is a great resource for all of FIRST to use over the years and has grown into a community that has taken a life of it's own. - Koko Ed [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Chiefdelphi is a great resource for all of FIRST to use over the years and has grown into a community that has taken a life of it's own. - Koko Ed [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Not a rookie team...but new to this
I have been with this team for a couple of years, and am now starting to get into the programming aspect... with one problem. I am having troubles getting Labview down. If anyone knows anything that could help me learn better would be much appreciated!
 
|
|
#2
26-01-2011, 16:22
|
||||
|
||||
|
Re: Not a rookie team...but new to this
I would recommend looking at the code that comes with the LABVIEW FRC Edition. Then if you can't get the gist, try asking us specific questions.
Hope that helps!
|
|
#3
26-01-2011, 20:24
|
|||||
|
|||||
|
Re: Not a rookie team...but new to this
I hear that http://www.frcmastery.com/ is a good resource.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
