Classmate not connecting wirelessly

[tomy]

on the back of the d-link make sure that it is AP mode

AP=Wireless and no Ethernet
Auto=Whatever is connected first
Bridge=Ethernet only

[Robobuff1.0]

It is on AP mode. i can get the DAP-1522 to connect with the other laptop that i am using, but i cannot deploy code to the cRIO.

[tomy]

did you reimage the robot?

also you need to make sure you have the WPA key

and make sure the ip address of the clam is 10.xx.yy.6 where xx.yy is your team number

[Robobuff1.0]

Yes i have re-imaged the cRIO. i haven't been asked for the WPA key. and should the IP be changed in local or wireless access?

[Mark McLeod]

Did you follow the Rev A updated "How to Configure the Radio"? It was just posted.

You want your wireless connection to be 10.16.33.5, not the Local LAN.

[Robobuff1.0]

Yes I have fallowed that. I have also double checked it as well. I also just changed the IP of the classmate and it didn't do anything. I am thinking that it has something to do with how the classmate cannot even see out shops wireless network.

[tomy]

make sure that the wireless is enabled there should be a light on by the f keys. if its not you need to press the fn button and find the button to turn on the wireless

[Robobuff1.0]

Yes the wireless is enabled. I even disabled it and enabled again, but it didn't change anything.

Now if for some reason when i tried to reconfigure the classmate with the update earlier it did not work. could that be the problem?

[tomy]

update?

[Robobuff1.0]

sorry. it was the 2011 Image for '10 classmate. one of my team members used the flashdrive on the wrong computer so i downloaded it from the FIRST website.

[tomy]

oh... that would not make a difference

and you said it wasn't picking up any wireless you say?

[Robobuff1.0]

correct, but for some reason it auto connects to one of the ASU networks nearby.