|
|
|
 In my opinion, I wouldnt want gifts or praise from people about my help to a robotics team, all I would want is a thank you, that would make all my hard work and efforts worth while and it would prove to me that I could actually be making a difference in the students lives - Mike Schroeder [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Bypass Switch That Will Lower A Lift After The Game has ended.
At the end of the game, if our lift is at full extension, can we have a bypass switch that will lower the lift after the game has ended so we can get the robot off the field?
We are aware that controls are cut off from the robot at the end of the match. We want to know if there can be a button (Either on the robot, or joy pad) that we can press that will lower a lift we have on our robot for easy retrieval as well as a safety hazard. 
|
|
#2
29-01-2011, 18:19
|
|||||
|
|||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
The robot will be disabled when the match ends. Regardless of where you place the switch, you will not be able to power a motor after the match ends.
|
|
#3
29-01-2011, 19:34
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Technically the robot will still have power, we would only have our controls cut off from the robot.
|
|
#4
29-01-2011, 19:35
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
See this thread.
|
|
#5
29-01-2011, 19:42
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Sorry, that persons also from my team.
I just thought if we opened several posts on the same subject we'd get different answers.
|
|
#6
29-01-2011, 19:44
|
|||||
|
|||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Quote:
|
|
#7
29-01-2011, 20:03
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Can you clarify:
"Your switch cannot be in the power pathway between any of these devices and the motors."
|
|
#8
29-01-2011, 20:06
|
|||||
|
|||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Check the Robot section of the manual. If you look and can't find it I'll give you the specific rule, but the language I used should be helpful.
|
|
#9
29-01-2011, 20:15
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
team did a quick discussion on this.. what we came up with:
you could have a 2nd thing wired from your power board with a light switch for direct power to the motor as well.. just make sure its off during the match.. that way you have 2 sets of power going to that motor.. 1 will be for after the match.. if you cant find the answer i say try it and if they say take it off its simple enough to remove. best of luck.. and great idea (: -2057
|
|
#10
29-01-2011, 20:17
|
|||||
|
|||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Quote:
|
|
#11
29-01-2011, 20:31
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Thanks guys!
In rule <R48> it only states that all motors must be connected to a speed controller, it says nothing about bypassing the speed controller at the end of the match. One of my mentors also came up with the sketch. Maybe it can help out a little. http://www.chiefdelphi.com/forums/at...2&d=1296350411
|
|
#12
29-01-2011, 20:32
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Kevin is correct. But, if you could easily diconnect the wires (sure as have a male-female connection in line) and hook them to a handheld battery, you might be able to get away with not violating T15. If you do try this, you need to be able to do it in a timely maner.
|
|
#13
29-01-2011, 20:36
|
|||||
|
|||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Quote:
|
|
#14
29-01-2011, 20:40
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Thanks!
But in rule <R48> it only states that a motor needs be connected to a speed controller, it says nothing about bypassing it at the end of the match. One of our mentors also came up with this sketch. Maybe it can clarify things. http://www.chiefdelphi.com/forums/at...2&d=1296350411
|
|
#15
29-01-2011, 20:43
|
||||
|
||||
|
Re: Bypass Switch That Will Lower A Lift After The Game has ended.
Thanks!
But in rule <R48> it only states that a motor needs be connected to a speed controller, it says nothing about bypassing it at the end of the match. One of our mentors also came up with this sketch. Maybe it can clarify things. http://www.chiefdelphi.com/forums/at...2&d=1296350411
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
- Arizona North
Linear Mode
