Go to Post We are reluctant to deprive you of the experience of learning how to do your own research. - Alan Anderson [more]
Home
Go Back   Chief Delphi > Technical > Motors
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #29   Spotlight this post!  
Unread 31-01-2011, 00:16
fox46's Avatar
fox46 fox46 is offline
Registered User
FRC #2013 (Cybergnomes)
Team Role: Mentor
 
Join Date: Feb 2003
Rookie Year: 2000
Location: Toronto, ON, Canada
Posts: 400
fox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond reputefox46 has a reputation beyond repute
Re: Stalling the BaneBot 775 motors

Whatever the capacitor is in the middle of the ring of transistors is.

Quote:
For the purpose of this discussion I think we are getting too far into the theory behind the component.

This is pretty basic AC circuit theory, and it has a profound effect (40 watts versus 200 watts) on the answer you get, so it's worth understanding
I agree but seems like this is much more than a basic AC circuit when we are apparently not dealing with changes in frequency but rather changes in duty cycle. The original purpose of the OP's question was to determe if it was acceptable to stall the RS775 at 20% power. My OPINION is that it is not acceptable, but by all means, go for it- you are only burning up 40W right? Last I checked, a 20% position of a joystick did not result in a 4% robot speed.

Quote:
The duty cycle varies linearly with input command
Okay but we are not concerned with the duty cycle but rather the output power which according to you is not linear to the input command. I disagree with this.

Quote:
Not sure what you mean by "exponentially" here. The effective voltage changes linearly with input command, and the effective current also changes linearly. The effective power thus changes as a square function.
Sorry, this is what I meant- Power is not linear to input using your method, as I stated earlier. "Exponentially" was the wrong term to describe this.

In any case, I still think the output is closer to 200W than 40W. I'll bet you the OP's RS775 . Let me know what your simulation shows. Until we come up with some actual Jaguar output wattages relative to control inputs lets just agree to disagree. When we get our software up and running and if I get around to it. I'll measure the percieved voltage and current going to our RS775s and plot it relative to input value in the program. Then we can see if the output power is linear or nonlinear to input command.
__________________
Mentor, Team 2013 Cybergnomes 2010 - 2014, 2016
Mentor, Team 3756 RamFerno 2011 - 2013
Mentor, Team 854 Iron Bears 2005-2007
Founding member, Team 854 Iron Bears 2000-2005

Mech.Eng.+Mgt University of Ontario 2009
B.Ed OCT Trent University 2015
Professional Education and Product Knowledge Consultant - Toyota Canada Inc.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:05.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi