|
Re: pressureswitch problem
Aya,
Check the output ports of your solenoid valves and the output of the vent valve with the soapy water. Some times the valves leak. If you do not have the working pressure set, some valves will not "seat". Some of them require at least 30 psi to work right. If you are still having a hard time, try isolating runs and see if the pump works correctly. This is easily accomplished by bending tubing in half to close it off.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Last edited by Al Skierkiewicz : 01-02-2011 at 13:47.
|
Remember, there are many differents path to obtaining knowledge. There's no need to pigeonhole the process. - Karthik [more] 
01-02-2011, 12:48
Threaded Mode