pic: 3021 The Agency's Omni-Directional Mecanum

[hurtzmyhead]

loading photo ...

[Tytus Gerrish]

Nice mecanums. a Hexagonal bloomer design.

my favorite.

[zbanks]

Won't those not work as mecanum wheels since the rollers point in opposite directions on the same wheel?

Or are you just using them as omniwheels for a killigough platform?

[EricH]

Originally Posted by zbanks

Won't those not work as mecanum wheels since the rollers point in opposite directions on the same wheel?

Or are you just using them as omniwheels for a killigough platform?

You're seeing two pairs of wheels. At least that's what it looks like.

On the "runs circles around West Coast Drive", you got any video? If you don't, I'm rather skeptical.

[Steve_Alaniz]

Oh WOW! Interesting idea.....still I must echo the concern or others... are these four different wheels or single wheels with dual sets of rollers.... not sure the latter could work.

Steve

<afterthought> OMG!!!! These wheels MOONWALK!!!!!

[MarkoRamius1086]

Oh! I think those are a full set of four... correct me if I am wrong.

Those look like really high quality rollers! Were those purchased from some obscure secret warehouse or do you have a sponsor capable of advanced machining? (Presumably CNC mill, CNC lathe, and some custom hardware...)

Good luck this year!
Petrie

[Steve_Alaniz]

Originally Posted by Steve_Alaniz

Oh WOW! Interesting idea.....still I must echo the concern or others... are these four different wheels or single wheels with dual sets of rollers.... not sure the latter could work.

Steve

<afterthought> OMG!!!! These wheels MOONWALK!!!!!

OK... there's the West Coast Drive so ... You'll have to name this the Michael Jackson Drive!!!!

[Jamie Kalb]

What's the coolness factor for those wheels? OVER 9000!!

[Bjenks548]

Assuming these are only 2 wheels... if you could tilt the wheels on one set of rollers or the other it would make an interesting drive.

[hurtzmyhead]

Assuming these are only 2 wheels... if you could tilt the wheels on one set of rollers or the other it would make an interesting drive.

Our programer suggested that. Although a pneumatic system would be much quicker at changing directions, you still just have a omni directional drive. Now if you replaced on of the wheels with a plaction or other wheel, and actuated that up and down. Essentially it would be a different way of doing a Octocanum drive.

Those look like really high quality rollers! Were those purchased from some obscure secret warehouse or do you have a sponsor capable of advanced machining? (Presumably CNC mill, CNC lathe, and some custom hardware...)

Yep, between our two gracious sponsors HK Plastics and Aztec Tooling, we have 7 CNC mills, 1 CNC Lathe, 5 Manual Lathes, and 3 Drill Presses. we are spoiled. The Hub of the rollers used some fancy set ups on the Drill press/ Mill (didnt use a single CNC on them, and the students produced them). The Rollers were made on the CNC lathe.

On the "runs circles around West Coast Drive", you got any video? If you don't, I'm rather skeptical.

The circles part was a joke. We don't see how these wheels would work as shown in the picture, so were guessing that it will just go around in circles. Hopefully we'll have some footage up tonight.

What's the coolness factor for those wheels? OVER 9000!!

Im glad someone got that

[jwfoss]

whats the outside diameter on this set of wheels... looks less than 6"?

[andreboos]

Originally Posted by jwfoss

whats the outside diameter on this set of wheels... looks less than 6"?

4 inches. Good thing we have a flat field this year! We'd never get over any bumps otherwise! I think we've epitomized "low-rider": our gearboxes nearly touch the carpet.

[thefro526]

Originally Posted by andreboos

4 inches. Good thing we have a flat field this year! We'd never get over any bumps otherwise! I think we've epitomized "low-rider": our gearboxes nearly touch the carpet.

Don't forget that the field isn't perfectly "Flat".

There are bumps by the tower from where they are mounted under neath the carpet. If you've got about .5"-.75" of Clearance you should be alright.

[xSAWxBLADEx]

that bump is nothing compaired to last year lol go fast enough and your robot doesnt even feel it

[Hawiian Cadder]

Originally Posted by thefro526

Don't forget that the field isn't perfectly "Flat".

There are bumps by the tower from where they are mounted under neath the carpet. If you've got about .5"-.75" of Clearance you should be alright.

we have 3/8 inch clearance.