Camera Problem

[basicxman]

Originally Posted by krudeboy51

#include "Vision/AxisCamera.h"
#include "Vision/HSLImage.h"

You shouldn't need to include these two headers if your Workbench and libraries are fully up to date, just WPILib.h.

Have you configured your AxisCamera as per the manual?
http://www.usfirst.org/uploadedFiles...our_Camera.pdf

[SuperBK]

We finally got our working thanks to kind people on here. We had ours mounted on a piece of lexan that was over the reset button and it was getting interrmittenly pressed. Make sure the button is clears the mounting.

Also use a crossover cable between the camera and the CRIO port 2.

[krudeboy51]

Originally Posted by basicxman

You shouldn't need to include these two headers if your Workbench and libraries are fully up to date, just WPILib.h.

Have you configured your AxisCamera as per the manual?
http://www.usfirst.org/uploadedFiles...our_Camera.pdf

I thought the problem was that I did not have those headers in, I inserted them in to the code to see if it would work, and I have followed he steps in the manual step by step and still nothing.

[krudeboy51]

Its working now thanks for your help, the problem was the password for the FRC account................. I think!