Driving with tower

[falconmaster]

http://www.youtube.com/watch?feature...&v=AsOqqhi-eGA

[billbo911]

We've had problems in the past with Wedge Top too. The solution we used was to insert #10 screws through the tread and into the wheel. Make sure the screw heads do not penetrate the tread or tear a larger hole and you should be good.

[Chris is me]

Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.

[Bruceb]

Are those this years plaction wheels with the wire conveyer belt connectors?
Bruce

[thefro526]

Originally Posted by Chris is me

Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.

We also throw a rivet in approximately 180* from where the tread meets, just in case one of the retaining groves in the wheel gets damaged.

[Siri]

Nice test drive! We use the screw method with thread brass inserts for the plaction wheels. Works great and makes for an easy switch-out. Description