Minibot Deployment Brainstorm!

[Grim Tuesday]

We are using a set of sliders, similar to the ones used on keyboard slidey trays, pushed out by two pneumatic cylinders.

They arent as smooth as we would like, but oh well, they are already bolted to the robot. Plus, we have plenty of grease...

[Nemisis]

Originally Posted by Grim Tuesday

We are using a set of sliders, similar to the ones used on keyboard slidey trays, pushed out by two pneumatic cylinders.

They arent as smooth as we would like, but oh well, they are already bolted to the robot. Plus, we have plenty of grease...

Lol very nice as well! It doesnt always have to be exactly smooth as long as it gets the job done right? lol We learned last year with a kicker idea that grease always helps! Thank you very much for your reply!

[klmx30302]

Out deployer uses 2 pistons, one to push the deployer out, the other to deploy the minibot. We have prototyping videos (only using the deployer) on my youtube channel here: http://www.youtube.com/user/klmx30302 I would post individual links but I have 10+ vids of deployer testing.

[Nemisis]

Originally Posted by klmx30302

Out deployer uses 2 pistons, one to push the deployer out, the other to deploy the minibot. We have prototyping videos (only using the deployer) on my youtube channel here: http://www.youtube.com/user/klmx30302 I would post individual links but I have 10+ vids of deployer testing.

Hmmmmmm! Interesting, very nice indeed! thank you for the reply! im going through the videos now! thank u for sharing!

[wjr1965]

There has been some buzz about trying to standardize minibot deployment so that teams can get points for "coopertition" by lending their minibots to other teams. Deployment standardization would permit this to happen more easily.

[Nemisis]

Originally Posted by wjr1965

There has been some buzz about trying to standardize minibot deployment so that teams can get points for "coopertition" by lending their minibots to other teams. Deployment standardization would permit this to happen more easily.

That would be really smart wouldn't it? it would be sorta interchangeable am i correct? that way more than one type of minibot could be deployed from a single deployer? Rather ingenious!!

[Nemisis]

I apologize for the tardiness of my posts... for some odd reason the last two I've posted, it popped up and said that they would be posted as soon as a moderator had approved them.I'm Confused!

[Hawiian Cadder]

i believe what we intend to do is push the robot out, and then rotate the whole robot with the minibot on the end into the pole, that way the most power full motors, in a relatively ideal setup, will deploy the robot.

[Nemisis]

Oh thats cool! different from others I've heard! So your arm deploys it? Thank you for the reply! Good Luck!

[mac]

To all: Can the minibot change shape? We are using the battery to swing down.
As it climbs the pole. Gravity takes over. Keeping the wheels cocked onto the pole.


Thank You, Mentor Mac Team 686

[Daniel_LaFleur]

Originally Posted by mac

To all: Can the minibot change shape? We are using the battery to swing down.
As it climbs the pole. Gravity takes over. Keeping the wheels cocked onto the pole.


Thank You, Mentor Mac Team 686

I see no rule that prohibits a minibot from changing shape, However <R91> must be complied with at all times

<R91> The MINIBOT may not exceed a 12” x 12” x 12” volume and weigh no more than 15 lbs.

[EagleEngineer]

The standard deployment system is a slider or drawer system. Simply just slides out. . Its very good cause if most or all teams have the same type of deployment you can share minibot with other teams and visa-versa.

[Stimpy1901]

We are using pneumatics to push our bot onto the pole. For now, we can get it onto the pole by forcing it (the wheels are tensioned by rubber band and can be pushed open by forcing the minibot onto the pole and then it springs back to "grab" the pole (simple X design).

Edit: the distance traveled on the pole is 49" in case you were wondering.

http://www.youtube.com/user/stimp190.../0/TJAQzR_p85w

[joeweber]

We are using the slide that came in the KOP and attached a 12 in pneumatic to it. It slides out quick. We hace a "V" on the end to help guide it with to virtical post to slide the mini bot onto. We have to add wheels under it so it can ride on the top of the platform to the pole. Fuzzy picture.

[Seathan93]

Wow, are we the only team with a deployment system that doesn't slide out?

we just have a box...and a flap goes down, and the minibot drives out onto the pole and then up it...we're close to getting it to work.