AxisCamera Programming

[Lawlhwut]

We were planning to program the axis camera to track the tape for our scoring device. We were planning to program it to use the image of the 9 pegs and track it with the image tracker. But with limitations in our budget, we weren't able to produce a full scaled, peg grid.

tl;dr: Is anybody willing to take a picture of their full scale 9-peg grid and supply the image to us?

[Greg McKaskle]

There are a few images in the white paper on the NI site http://decibel.ni.com/content/commun...#/?tagSet=1001. It is in the lower right corner.

Greg McKaskle

[Lawlhwut]

Sorry, but I'm not following you. The far right hand corner you are talking about, how does it look like? Which words can i type into ctrl+f that would take me to the location?

[basicxman]

Originally Posted by Greg McKaskle

http://decibel.ni.com/content/commun...#/?tagSet=1001

I believe this is the incorrect URL.

Originally Posted by Lawlhwut

Sorry, but I'm not following you. The far right hand corner you are talking about, how does it look like? Which words can i type into ctrl+f that would take me to the location?

While not a whitepaper with the peg board, you should find this document very useful. http://decibel.ni.com/content/docs/DOC-14726.

If you cannot get a scoring board due to budget, make sure you allot some time on the practice field to tune your program or even better - find a local team.