Toggle switches to Analog board?

[sircedric4]

I just want to make sure I understand this wiring, we are at the point we are about to use the analog to digital trick. I assume this is how I wire it from you guy's instructions?

   ---/Switch/---------
   |               |   |
   |               |   10k Resistor
   |               |   |
   |               |   |
   B              W   R

Where B is the black wire, W is white wire, and R is red wire on a standard PWM cable. Basically tie the white wire and the red wire through a resistor onto one side of the switch and the black wire on the other?