Is my cRIO completely broken!?

[Doug Norman]

Check to make sure you have 24 volts at the cRIO power input. If you do, and no power light is on, call our application engineers at 866-511-6285. They will have you test a few things. If the cRIO fuse is blown, and we need to RMA the unit, we will send you a replacement immediately.

[jacobs1232]

We tried ping 10.13.51.4 and we got Reply from 10.13.51.9: Destination Host Unreachable.
The power LED on the cRIO is not on, and we have tried using an Ethernet cable to go directly from port 1 to the laptop.

[Greg McKaskle]

Aluminum chaff does have a way of going where you wish it didn't, but as Doug mentioned, please verify the power inputs to the cRIO. I myself have personally carted a new cRIO to DC in my suit case only to discover that is was a bad power connection and the cRIO was fine.

If it doesn't respond to a 24V input, call NI support.

Greg McKaskle

[R.C.]

Originally Posted by Greg McKaskle

Aluminum chaff does have a way of going where you wish it didn't, but as Doug mentioned, please verify the power inputs to the cRIO. I myself have personally carted a new cRIO to DC in my suit case only to discover that is was a bad power connection and the cRIO was fine.

If it doesn't respond to a 24V input, call NI support.

Greg McKaskle

Greg,

Just to take time out and say thank you NI. NI has amazing customer support, they are very direct and helpful. I sincerely appreciate all your time and appreciate your dedication to FIRST Robotics.

Tess, I highly recommend just giving NI a call.

-RC

[Greg McKaskle]

It's our pleasure.

Greg McKaskle