New Compressor Source

[Jonathan Norris]

I was wondering if anyone has found a good source for the new compressor:
http://www.viaircorp.com/OffRoad/90C.html

We have been looking around for it and it seems to be sold out at most places. Any Canadian teams know of a source for it in Canada??

[Jimmy Nichols]

The 090C, 092C, and 095C are all interchangeable as they have the same funtioncal specifications:

092C - http://www.amazon.com/Viair-92C-Volt...6263&sr =1-29

095C - http://www.amazon.com/Viair-95C-Volt...6263&sr =1-45

The 092 is what we ordered.

[spiffyspleen]

Does anyone know how much those models weigh compared to the kit compressor? Can they handle as much load as the standard compressor?

[woodk]

Those compressors may be interchangeable, but are we allowed to use them for FRC? I thought we were only allowed to use the kit model.

- Kevin

[Joe Ross]

Originally Posted by woodk

Those compressors may be interchangeable, but are we allowed to use them for FRC? I thought we were only allowed to use the kit model.

See <R69>

[Mr V]

The 092c is within an ounce or so of the weight of the 090c they are the identical compressor other than the intake plate which on the 092c has a threaded bung to take it's external air filter rather than it being under the intake plate. That is what our team is using per the GDC saying they will accept a compressor of the same specs. We plan on printing out the data sheet for both just in case the inspector questions it.

[BJT]

The weight of the new compressors is about half of the old ones, about 2.5 pounds vs. about 5 for the old one.