New Compressor Source

[woodk]

Those compressors may be interchangeable, but are we allowed to use them for FRC? I thought we were only allowed to use the kit model.

- Kevin

[Joe Ross]

Originally Posted by woodk

Those compressors may be interchangeable, but are we allowed to use them for FRC? I thought we were only allowed to use the kit model.

See <R69>

[Mr V]

The 092c is within an ounce or so of the weight of the 090c they are the identical compressor other than the intake plate which on the 092c has a threaded bung to take it's external air filter rather than it being under the intake plate. That is what our team is using per the GDC saying they will accept a compressor of the same specs. We plan on printing out the data sheet for both just in case the inspector questions it.

[BJT]

The weight of the new compressors is about half of the old ones, about 2.5 pounds vs. about 5 for the old one.