|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
2992-Hanging Top Tube
We got our finalized elevator all complete this weekend and wanted to see how the robot would perform at max height and with a tube. We got our final electronics and pneumatics board on the basic chassis and took it to the school's common area and here is the video:
http://www.youtube.com/watch?v=En5X03uswCo We still have to get the claw's wrist motor on, and the minibot deploy figured out, and a ton of little fiddly bits, but we were given a new blast of energy after Saturday. It's starting to look like a robot. Best of luck everyone. |
|
#2
|
||||
|
||||
|
Re: 2992-Hanging Top Tube
Looking nice
|
|
#3
|
||||
|
||||
|
Re: 2992-Hanging Top Tube
nice, my team is doing something similar, are those 2*1*1/8 c channel? and if so how do you keep it from binding.
|
|
#4
|
||||
|
||||
|
Re: 2992-Hanging Top Tube
Quote:
The major disadvantage of 8020 is that it is heavy, so we are always keeping an eye on where we can save weight. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|