LabVIEW Installation

[jhellr13]

Originally Posted by Doug Norman

I can speculate one thing that may be happening. You are trying to license before you have installed the update. Here is what I would try:
1. Uninstall all NI software.
2. Remove all license files. These are *.lic or *.lc files and should be located in a path similar to: C:\Program Files\National Instruments\Shared\License Manager\Licenses...
3. Install Everything from the NI DVD in the kit - do not enter the L13R02200 when you do this. Don't license anything at this point.
4. Download and install the latest FRC LabVIEW update (3.1) from http://joule.ni.com/nidu/cds/view/p/id/2261 Use the L13R02200 serial number when you install this update.

Thanks for the reply. I am reinstalling it now. Will let you know how it goes

[jhellr13]

Doug,
For step number 4, is the installer supposed to ask me to enter the serial number, or am i supposed to activate before installing the update? Just want to make sure.

Thanks

[Doug Norman]

Originally Posted by jhellr13

For step number 4, is the installer supposed to ask me to enter the serial number, or am i supposed to activate before installing the update? Just want to make sure.

Enter the serial number during Step 4. Do not activate before the update.