|
|
|
 [how to read the rules] Slowly, carefully, word by word, taking your time as if it was the last corndog of the summer. - Foster [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| [how to read the rules] Slowly, carefully, word by word, taking your time as if it was the last corndog of the summer. - Foster [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Programming Encoders
Hey, rookie programmer here. I just want to know how to program some encoders in LabView 8.6. I see the enoder function with the A source and B source but when I try to create a constant, something really confusing comes up on the screen. Therefore, if any can help inform us on how to fill out the constant "form" or if there is an alternative way please respond.
Thankx in Advance 
|
|
#2
09-02-2011, 17:13
|
||||||
|
||||||
|
Re: Programming Encoders
Look at the encoder example included with labview. You need to create digital inputs, and then connect that to the encoder A and B inputs through a digital source conversion.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
