Spikes and CIM? - Chief Delphi

We don't have to reinvent the wheel every year. (We have AndyMark to do that for us.) - GaryVoshol [more]

		Chief Delphi > Technical > Electrical
Spikes and CIM?

Thread Tools

Rate Thread

Display Modes

11-02-2011, 08:38

Superllama12 Superllama12 is offline

Wombaticus

AKA: Brandon Buncher

FRC #0540 (Talon 540)

Team Role: Electrical

Join Date: Jan 2011

Rookie Year: 2004

Location: Henrico, VA

Posts: 150

Superllama12 is an unknown quantity at this point

Spikes and CIM?

We were trying to use a spike to control a CIM on an old robot we're repairing. We blew a couple of fuses and talked to some mentors until finally someone said to try a Vic. The Vic worked, but does anyone know if we're able to use a Spike to control a CIM? The PD board was putting out 30 amps, and the Spike had a 20 amp fuse, is that the problem, or are they physically incompatible? Thanks!

__________________
I would put a signature here, but that's too mainstream

Wait a moment...

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:12.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.