Audio Levels

[Carl C]

Then I have problem. How do you keep it above that level? Half of my audio dips below -18db!

[Nerd_Skywalker]

Raise the volume!!

[Carl C]

Originally Posted by Nerd_Skywalker

Raise the volume!!

But when I raise the volume, it goes above -6db! Either the balance will sound like it was put together by a five year old, or we'll get DQ'ed.

[theprgramerdude]

Originally Posted by Carl C

But when I raise the volume, it goes above -6db! Either the balance will sound like it was put together by a five year old, or we'll get DQ'ed.

Could you run some of the sounds through a filtering program that can do a log function on the whole thing? Tinkering with the filter will enable you to compress the sounds without too much loss.

[Al Skierkiewicz]

If you read the rule again it says that peaks must not fall below -18dB. When put together with the previous spec, peaks should fall between -18dB and -6dB.

[Carl C]

Originally Posted by Al Skierkiewicz

If you read the rule again it says that peaks must not fall below -18dB. When put together with the previous spec, peaks should fall between -18dB and -6dB.

So the highest volume of the animation cannot be lower than -18db? Thanks!