NetBeans robot communication/subnet problems

[lusterlink]

Originally Posted by Jose.Pena2737

I'm having the same problem.

What happens after it gives me the subnet error, It says it's trying to connect to "FTP@ 10.0.0.2" even though our cRIO's IP address is 10.27.37.2.

If I change the cRio's IP to 10.0.0.2, it leaves me hanging on "Overload Me".

I've gone through various updates(I was having this problem two weeks ago, back then, the cRIO image was v25, now it's v27) and nothing has worked.

I would appreciate some help.

I believe this means you haven't set your team number in the preferences of Netbeans. It should be under Tools -> Options -> Miscellaneous ->FRC Configuration. Keep the cRIO's ip at 10.27.37.2.

[cRIO] RobotInit() completed.
[cRIO]
[cRIO] Default IterativeRobot.disabledContinuous() method... Overload me!

Are you enabling the robot and getting the same output in Netconsole? Otherwise, I think enabling the robot will fix your problem.