|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Tetrix Thermal-Protected DC Motor Power Cable Modifications
If you solder wires on the motor be forewarned that the plastic holding the terminals is extremely heat sensitive and melts rather easily. The temperature required for lead free solder makes the plastic turn to jello. With the resulting moving of the terminals. And if they move the connection to the internal brush tab will likely be broken. Then you will need to open the motor rendering it useless for competition.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|