CRio Connection: Buggy

[thE_iyE]

Just to cover some bases for ChaosX73:

Originally Posted by ChaosX73

It's not the fact that there is no code, it's the fact that for some reason, the CRio doesn't want to admit that it's connected to my computer. My mentor said something about the CRio being "Bricked" but I have no idea what that means.

I can't seem to image the cRio from my personal laptop, so I have to use the classmate. I 'bricked' (which means to turn it into an expensive paper-weight) our cRio by using the imaging tool on my laptop, so the way you have to fix it is format the cRio. You format it by putting the cRio in safe-mode. Once its in safe mode, try to deploy code using the imaging tool. It will recognize it in safe-mode and ask if you want to format it, do so. This will return it to its normal state so you can put new code on.

Its likely not bricked, so try and just deploy v28, but if your computer doesn't recognize it and the IP address doesn't seem to be recognized by your computer, its likely bricked.

Again, this is just to cover some bases for ChaosX73. Hope it helps!