|
|
|
 My students want me to confirm if they're only allowed one submission per team? (Apparently they've gotten a sudden wave on linguistic inspiration...) - Siri [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| My students want me to confirm if they're only allowed one submission per team? (Apparently they've gotten a sudden wave on linguistic inspiration...) - Siri [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
|
|
#2
15-02-2011, 10:29
|
|||||
|
|||||
|
Re: pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
Hopefully you mean polycarbonate and are just referring to it as plexi. If you are using plexiglass (acrylic), it's going to shatter.
|
|
#3
15-02-2011, 10:30
|
|||||
|
|||||
|
Re: pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
Cory beat me to it. Any kind of acrylic will be a disaster. Polycarb is the only way to go.
|
|
#4
15-02-2011, 10:42
|
||||
|
||||
|
Re: pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
If it were acrylic, wouldn't it shatter in the waterjet?
5/8" polycarbonate is honestly probably overkill. 3/8" polycarbonate is quite hefty by itself.
|
|
#5
15-02-2011, 11:12
|
|||||
|
|||||
|
Re: pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
I was told it was plexi. I will check again with the team member who designed it.
If we do use the polycarb, we might put LED's inside for the feeder signal light. Imagine a color changing claw! Also, I forgot to thank NASA Dryden for the WaterJetting!
|
|
#6
15-02-2011, 11:17
|
|||||
|
|||||
|
Re: pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)
Quote:
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
