Problems with Deploying code

[Alan Anderson]

Originally Posted by dratewka2

all of the dip switches on the cRIO are set to on(True), should they all be positioned like that?

No. They should all be OFF. I suspect they already are, because you wouldn't be able to do anything with the IP RESET switch ON.

You can turn the CONSOLE OUT switch ON if you want to monitor the VXworks console on the DB9 serial connector. The USER switch can be whatever you want it to be. The NO APP switch won't make any difference if you aren't using LabVIEW.

[dratewka2]

oops, i meant off sorry all the dip switches are set to off but still nothing.

[Trump]

Have you tried reimaging the CRIO. If you're using CAN try formatting it without any of the Can Drivers, and then go back in and put the CAN drivers on without reformatting. Also use netConsole to check that you aren't getting any run-time errors.