|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||
|
||||
|
Re: CANExceptionFactory error
A couple of possible causes.
- Jaguars do not have unique ID's (conflict) - Jags do not have correct firmware. - Sending to jag ID that is not present on the bus(although I thought this issue was fixed in the last update) - Poor termination Some things that you could provide to help diagnose the issue. - 2CAN firmware version - 2CAN led state (red, orange, green) - 2CAN web dash status(main page) - Jag firmware version - 2CAN plugin for cRIO version. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|