|
|
|
 Don't rely on the field staff to get every ball to work with your machine....engineer a robot that makes the change not matter. - PayneTrain [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Don't rely on the field staff to get every ball to work with your machine....engineer a robot that makes the change not matter. - PayneTrain [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Camera dislikes cRIO
We are trying to set up a camera and are having a very strange issue. While the camera seems to work with older cRIOs (with the exact same code and image) it doesn't want to show anything with this years. All help would be appreciated.
|
|
#3
19-02-2011, 10:59
|
||||
|
||||
|
Re: Camera dislikes cRIO
No they are not
|
|
#4
19-02-2011, 13:34
|
|||
|
|||
|
Re: Camera dislikes cRIO
The code has been confirmed to be correct, what is happening is when we plug the camera into the cRIO, both the green and yellow lights are solid and we think that the yellow light is supposed to be flashing
|
|
#5
19-02-2011, 14:14
|
||||
|
||||
|
Re: Camera dislikes cRIO
Hi,
I'm using the camera AXIS 206. My camera was runnig before I did the drive station and the 3.2 labview update. after this the camera didn't show in the dashboard(drive station). and when i passed the code to the robot, there are errors about the camera. can you help me? |
|
#6
19-02-2011, 16:25
|
|||||
|
|||||
|
Re: Camera dislikes cRIO
Is the camera reset switch being pressed accidentally?
|
|
#8
19-02-2011, 20:41
|
|||||
|
|||||
|
Re: Camera dislikes cRIO
Quote:
 |
|
#9
20-02-2011, 12:16
|
|||
|
|||
|
Re: Camera dislikes cRIO
The reset button is not being pressed for us, but we have tried resetting it and it didn't work
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
