|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
I have a huge problem!
I used to communicate with c-RIO wirelessly but now I can't. I thought it's because of the D-Link These are the steps that Ive done and concluded that the problem is because of the D-Link 1)I configured the D-Link and c-RIO with a non-classmate notebook 2)Then I re-imaged the c-RIO and saw the green lights on Driver Station. 3)Today, I use the classmate to connect wirelessley but it fails. 5)Then I attach the classmate physically to the c-RIO to re-image it. 6)The c-RIO is re-imaged succesfully.(It was written) 7)When I open the DS the communication light is green(So it shows there's no problem with the imaging tool) 8)After, I detach the classmate and try the wireless connection. 9)It fails(So I thought there must be a problem with D-Link) 10)I take the D-Link and reset it or just think it's resetted.(Maybe I can not reset it because after I press the button of reset the light doesn't stop flashing.) 11)Firstly I change the IP address of classmate like that (192.168.0.51) As it says in the PDF of How to Configure the Radio 12)Then I type "192.168.0.50" to internet explorer. 13)And I see a page like that ![]() Uploaded with ImageShack.us Can anyone help me with that?? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|