|
|
|
 Our robot-in-progress got set on the scale yesterday, It came to about 115 pounds. Then I walked up and took out the battery, and everyone relaxed some. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Bumper Rules!
We are re-making the bumpers for our robot. We put the holes about 1 inch off from rules that we just saw and we are using up wood like crazy. So what are all the rules regaurding the bumpers specifically? Thanks!
Last edited by GaryVoshol : 19-02-2011 at 07:05. Reason: fixed formatting 
|
|
#2
19-02-2011, 00:19
|
|||
|
|||
|
Re: Bumper Rules!
http://www.usfirst.org/uploadedFiles...Robot_RevJ.pdf
<R07> - <R09> starts on page 5. If you mean the holes for fasteners, there is no set location. They can go where necessary to attach to your 'bot.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
