|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Can't update cRIO
I've updated it previously easily but now I get this error:
Code:
Unable to complete operation because of unexpected error: Error 7 occurred at File/Directory Info in ConfigUtility.lvlib:ReImageTarget.vi->ConfigUtility.lvlib:Dialog.vi Possible reason(s): LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer. C:\Users\Developer\AppData\Local\Temp\lvtemporaryd_309756\CRIO |
|
#2
|
||||
|
||||
|
Re: Can't update cRIO
hey, were having the same problem. If anyone has the answer please reply!!
|
|
#3
|
|||||
|
|||||
|
Re: Can't update cRIO
That path makes it look like you might have tried updating LabVIEW by running the setup program from inside the .zip file. If that's the case, extract the files from the .zip first and perform the update again.
|
|
#4
|
|||
|
|||
|
Re: Can't update cRIO
I found the issue. I iniitally downloaded and extracted the files on a Linux system onto a flashdrive (since the classmate is not internet configured) so the best solution is to redownload, extract, and upload all on the classmate, even if it means reconfiguring the classmate.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|