Help with LabVIEW update 3.2

[toastnbacon]

We ran into some trouble when downloading the update on our windows 7 computer. When we tried to open the driver station, it started giving an error. I don't remember what the error was, but we fixed it by going into Control Panel/programs/programs and features. I selected National Instruments Software, selected all of the products that came up, and just went down the list on repair. It eventually worked, but it reset my labview, and now I have to activate it. The only problem is, the serial numbers it's asking for are things I've never seen for. I've attached the window that is asking for it. Any ideas?

[Joe Ross]

The serial number was included in the kit of parts. It's a 9 digit code with letters and numbers that starts with an L.

[toastnbacon]

That's just for LabVIEW in general. It doesn't work in any of these blanks.

[Mark McLeod]

Try re-activating using the LabVIEW License Manager.

Start->All Programs->National Instruments->NI License Manager

Expand LabVIEW 8.6.1

Right-click on Development System and choose Activate...

Give it the L code, etc.

[toastnbacon]

Thanks! I ended up just un and then reinstalling labview, and now it works like a charm! Thanks again!