.out file not building!

[Rosemount2606]

Originally Posted by tomy

have you reimaged your crio?
have you updated windriver?
on the crio are all dongles off but counsel out?
have you done a clean build?
do you have anything in your code that is not hooked up to the robot?
ex: sensor, encoder....

-Im not really sure where to find a windriver update but i feel like ours should be updated.
-Yes we reimaged the CRIO, thats why we not have no code on or robot.
- Yes the dongles are off except console out
-Yes we did a clean build
-No

[Rosemount2606]

Originally Posted by Rosemount2606

-
- Yes the dongles are off except console out

We are rebooting through the driverstation and cutting power via the breaker, and then giving it back to the robot

[tomy]

all you have to do to reboot is use the driverstation

make sure the code fully downloads

are you using the clam for programming?

[Rosemount2606]

Originally Posted by tomy

all you have to do to reboot is use the driverstation

make sure the code fully downloads

are you using the clam for programming?

I meant to say that we have tried both methods, mainly we have just been doing the reboot of the crio via the classmate, but since that wasn't working, we also tried the physical reset.

The code has "fully downloaded". As in, when we say to deploy, the transfer status bar fills up.

We do not know what you mean by "the clam for programming"

thanks for the help!

[basicxman]

Originally Posted by Rosemount2606

The code has "fully downloaded". As in, when we say to deploy, the transfer status bar fills up.

WindRiver frequently says stuff that is incorrect . Sometimes the progress bar will complete even when there is no connected target >_>

Originally Posted by Rosemount2606

We do not know what you mean by "the clam for programming"

I...think...he means the netbook provided in the kit of parts (reference to Clamshell netbooks?).

[basicxman]

Originally Posted by Rosemount2606

-Im not really sure where to find a windriver update but i feel like ours should be updated.

I mean this in the most gentle way possible: This isn't satisfactory.

http://firstforge.wpi.edu/sf/frs/do/...e_for_2011_f_1