|
WiFi/Bridge/CRIO Boot Conflict
Sooooo. ever had one of those moments at competitions where you turn your robot on and it doesn't connect to the field control system?
I know why.
This year's new D-Link Bridge boots up slower than the CRIO. The CRIO boots completely and then the Ethernet port is already configured. When the bridge then tries to connect to the CRIO and the wifi. It Can't. So I left the main robot power on and unplugged the power from the CRIO while the Bridge was still on. And the Bridge connected to the CRIO and WI-FI almost immediately.
This is a real problem. Has anyone else experienced it and is there a way to fix it without just having a hard switch wired to the CRIO to make sure the bridge boots first.
THANKS!
John Fogarty
__________________
John Fogarty
2010 FTC World Championship Winner & 2013-2014 FRC Orlando Regional Winner
Mentor FRC Team 1102 M'Aiken Magic
"Head Bot Coach" FTC Team 11444 Garnet Squadron
Former Student & Mentor FLL 1102, FTC 1102 & FTC 3864, FRC 1772, FRC 5632
2013 FTC World Championship Guest Speaker
|
Where can I buy the awesomeness that you used on that? Do they sell it at andymark? - HansJ [more] 
Threaded Mode