|
Re: Code Not Responding At All!
Quote:
Originally Posted by bodoggy
That's odd. We were running just fine with ver27 and wanted to make some code changes, so after installing the latest updates in NetBeans, we received a message that we needed to re-image cRio to v28. After we performed the re-imaging, we uploaded our new code and now nothing works properly. All the relays outputs only turn on the spikes in one direction. And the victor controlling the arm is not getting any signal whatsoever. This all happened at a scrimmage event we were lucky to attend in Bridgewater, NJ. Some top Java minds there where unable to help. So we left the scrimmage after 6 hours without getting our robot off the blocks! Wish we could go back to v27! What gives?
|
Yeah, there's been a lot of threads about v28 not working properly. We're just sticking with v25 until just before the competition in hopes that the latest version will be fixed.
__________________
PETA wants your help finding Schrödinger.
|
Legend has it that Brandon installs the server in a bulletproof case shortly before Kickoff. That way, when the server explodes, the damage to surrounding things is minimal. ;) - Billfred [more] 
Hybrid Mode
