Axis Camera 206 Problems

[ArchVince]

Originally Posted by DonRotolo

Sounds like your power connection is intermittently losing contact.

The power light is staying on throughout, though. I'll check our connection, though. We're currently using an ac adapter.

EDIT: We tested it out with a volt meter, and it holds steady at 5.2.

EDIT: Alright, that's weird. It works when the back casing is off.

EDIT: Alright, after some tweaking, it now works fine. As long as it doesn't move -__-

RESOLVED: It was the power after all! While we were getting power through just fine, the original connecter it came with jiggled around. We replaced it with a new one, and it work well.

[Daiane]

Hi

I have problems with the camera,

i reset the camera, change the IP adress but don't show in the dashboard and i can't make the setup axis camera, show:

Unable to complete operation because of unexpected error %d:
%s59 TCP Open Connection in Axis Issue HTTP Request with Authentication.vi->Axis Issue Get.vi->Axis Create FRC User.vi->Dialog.vi

can you help me?

[Alan Anderson]

Originally Posted by Daiane

i reset the camera, change the IP adress but don't show in the dashboard and i can't make the setup axis camera,...

I don't understand you fully. What IP address did you change? You should not change the camera's address. It sounds like you're using LabVIEW. The Robot Project with Game Code uses the default address of the camera.

Did you follow the directions in the How to Configure your Camera document from the http://www.usfirst.org/frc/kitofparts web page? If those directions are what you can't make work, tell us exactly what steps you're taking and exactly where the results differ from what you expect.