|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: Rsl light problems
What if not all the three lights are turning on? how can we fix the problem?
|
|
#17
|
|||||
|
|||||
|
Re: Rsl light problems
Quote:
If it's the 5V light that is off then you need to securely seat the 37 pin cable in a powered cRIO and the Digital Sidecar. |
|
#18
|
||||
|
||||
|
Re: Rsl light problems
Quote:
|
|
#19
|
|||||
|
|||||
|
Re: Rsl light problems
If the 5 volt LED is not turning on, check that the wiring to your compressor switch is not using the +5 volt pin. It should be connected to the black and white pins on your PWM cable. If the 6 volt LED is not coming on check to see if you have any jumpers in for the PWM outputs to supply servo power. If you are not using servos, there should be no jumpers. If there are jumpers in place, check to make sure that none of the cable is shorted or exposed pins are contacting metal parts. Check for metal shavings on the DSC.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|