|
|
|
 Call it confidence, call it ego, call it what you want, but the fact of the matter is you need to be humble or someone will humble you. - Dan Richardson [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Call it confidence, call it ego, call it what you want, but the fact of the matter is you need to be humble or someone will humble you. - Dan Richardson [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Cypress Outputs not setting
If the PSoC is being used in compatibility mode, the LEDs and outputs are updated together. If you switch to enhanced, go through the channels and make any config changes you want, switch to enhanced, and they in disabled mode or something easy to get to, pulse the LEDs as a test. If you switch over to the enhanced I/O mode, completely switch over. Don't use a combination of compatible and enhanced.
Greg McKaskle Last edited by Greg McKaskle : 22-02-2011 at 19:20. Reason: more info 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
