zomB Dashboard

[MikeNimmo]

Originally Posted by byteit101

yes, any MJPEG camera will do, set the source to MJPEG and the camera's ip in the box below

Visual ZomB, ZomB.dll & ZomB Eye: .Net (C# and WPF)
main bindings & C interface: C++
java interface: Java
Labview Interface: Labview

EDIT: to use the MJPEG camera, make sure you have an "frc" account on the camera with password "FRC" (w/o quotes)

We are thinking about bypassing the cRio with the camera because we aren't planning on doing any image processing. This means that we do not need any camera code and just need to set parameters in the zomb designer for the camera, right?

We have a PC with the camera plugged in a network hub, we set "Source" to be "MJPEGStream" and "Source args" field to be 10.31.26.20 in the visual zomb and pressed F5. The camera image is not showing on the ZomB dashboard pop up. Did we do something wrong? We have the frc/FRC account and also enabled anonymous connection for the camera. The image shows up fine on IE at http://10.31.26.20/ which means there is nothing wrong with our camera connection.