Does the I/O section of the FRC Driver Station need to work?

You only really ever need 2 things in your tool box: A Hammer to separate things that shouldn't be together, and Duct Tape to put things together that shouldn't be apart. - Dave_222 [more]

		Chief Delphi > Technical > Programming > NI LabVIEW
Does the I/O section of the FRC Driver Station need to work?

Thread Tools

Rate Thread

Display Modes

28-02-2011, 23:49

WizenedEE

Registered User

AKA: Adam

FRC #3238 (Cyborg Ferrets)

Team Role: Leadership

Join Date: Jan 2011

Rookie Year: 2010

Location: Anacortes, WA

Posts: 395

Re: Does the I/O section of the FRC Driver Station need to work?

The I/O tab is only used if you have the Cypress board attached. The Cypress is the best/easiest way to use non-joysticks to control the robot.

A fault condition on the jaguars means over current (stalling), over temperature, under voltage (from battery) or limit switches (make sure yer jumpers are in).

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:21.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.