Minibot & Robot Starting Config

[TerryS]

Originally Posted by keericks

So as long as the minibot "overhang" doesn't breach the starting configuration volume (our host robot is well under) we should be fine then. In other words, there doesn't seem to be any rulings this year about starting outside frame perimeter ... it's starting within the Starting Config. Volume.

"<R14> When a ROBOT is in its STARTING CONFIGURATION, no part of the ROBOT shall extend outside the vertical projection of the FRAME PERIMETER. "

[idahorobot]

Originally Posted by TerryS

"<R14> When a ROBOT is in its STARTING CONFIGURATION, no part of the ROBOT shall extend outside the vertical projection of the FRAME PERIMETER. "

I see many teams carrying off robots way out of starting configuration the frame perimeter. My understanding is this not correct.

[WileyB-J]

Originally Posted by idahorobot

I see many teams carrying off robots way out of starting configuration the frame perimeter. My understanding is this not correct.

opposite ends of the match sir, the perimeter doesn't matter after the match/starting perimeter is broken.