Anyone successful with camera in RobotPy?

[krudeboy51]

Originally Posted by taichichuan

Not that I'm aware of. If you put the camera on the 10.x.y.0 network, you should be able to see the camera output if you connect directly to the camera's IP.

HTH,

Mike

Yea, Im not getting a live feed that way, I followed the instructions in the manual to set it to 10.xx.yy.zz but no feed

[taichichuan]

Originally Posted by krudeboy51

Yea, Im not getting a live feed that way, I followed the instructions in the manual to set it to 10.xx.yy.zz but no feed

Hmm... Check to make sure that the subnet is set properly (255.0.0.0). You should be able to ping the camera (open a cmd box and do "ping 10.xx.yy.zz"). Also, you should be able to open the camera's web interface via a browser and any device on the same subnet. If you can't ping the camera, then you've got a cable or other connectivity issue.

HTH,

Mike