Liquid Gases on Robot as coolant

[Ether]

Originally Posted by theprgramerdude

I was rather suggesting that pouring a rather minute amount of LN, or a similar supercooled, non-toxic gas onto the circuitry, and letting it evaporate

Pouring liquid N2 directly on your circuitry will almost certainly destroy it.

[theprgramerdude]

Originally Posted by Ether

Pouring liquid N2 directly on your circuitry will almost certainly destroy it.

Most likely. It's why I mentioned using canned air and spraying it upside down prior to a match, rather than storing it on the robot.