|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
|||||
|
|||||
|
Re: Robot Code Error issues
If you don't have a programmer to debug the issue, and it should be checked out, then you can disable the error by going to Begin.vi, double-clicking the "Open 2/4 Motor" vi and changing the "enabled" box to "disabled."
The error can mean your code is running too slowly, but there are other reasons too. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|