BaneBots Tranny

[MrForbes]

How is it controlled...does it speed up and slow down gradually at the ends, or just kind of turn on and off? The transmissions seem to be very susceptible to shock loading.

[CidTeach]

probably not clear in my first few small pics, but a 1/8" AL plate across the top/bottom with 4 holes, plus longer screws handles the twisting there. The roll pins were a cheap and dirty attempt - Bad banebots, Bad! The weld held up nice, with no noticeable internal distortion - if you can control the heat input.

my major gripe is, why these problems with the huge delay and not so cheap $$tag.